OUR VISION
OUR MISSION
PRODUCTS
EPS Packaging
EPS Loose Fills
EPS Balls
EPS Insulation Sheets
EPS Ice Box
EPS Block
EPS Pallets
EPS Buffer Pack
EPS Pipe Section
Thermocole - Geofoam
Thermocole Neopor Product
Thermocole E - Por Product
 
 
 
PRODUCTS
EPS Packaging
Eps packging- Expanded polystyrene (EPS) is a rigid and tough, closed-cell foam. It is usually white and made of pre-expanded polystyrene beads. Familiar uses include molded sheets for building insulation and packing material for cushioning fragile items inside boxes.
EPS Loose Fills
EPS loose Fills - EPS loose fills are expanded beads of different sizes. These expanded beads(loosefills) are available in different sizes and has different applications.
EPS Balls
EPS balls – EPS balls are made in different sizes and density range depending upon the requirement.
EPS Insulation Sheets
EPS insulation sheets – EPS insulation sheets are extremely lightweight, eco – friendly thus are preferred by many and find a wide range of applications that include packaging of fragile and valuable items
EPS Ice Box
EPS ice boxes – EPS ice boxes are used for the preservation of various beverages and food items like fish and chicken. These boxes are designed  in accordance with the specifications of clients
EPS Block
EPS blocks - Block moulded EPS has a myriad of uses - from geofoam supporting major roadways to intricate architechtural mouldings. Large blocks of EPS (typically 5000 x 1200 x 600 mm) are cut, shaped or bonded to
provide the various products and applications.
EPS Pallets
EPS pallets – EPS pallets are mostaly used by large exporters as it give good protection while handling and very light.
EPS Buffer Pack
EPS buffer pack – EPS buffer packs are made in different size and shapes as per the requirement of client.
EPS Pipe Section
Eps Pipe -  Eps pipes are used as a insulation to the pipes which carry liquid or gas at very low tempture.
Thermocole - Geofoam
Thermocol- Geofoam is expanded polystyrene (EPS) or extruded polystyrene (XPS) manufactured into large lightweight blocks. The blocks vary in size but are often 2 m x 1 m x 0.5 m. The primary function of geofoam is to provide a lightweight void fill below a highway, bridge approach, embankment or parking lot. EPS Geofoam minimizes settlement on underground utilities. Geofoam is also used in much broader applications, the major ones being as lightweight fill, green roof fill, compressible inclusions, thermal insulation, and (when appropriately formed) drainage.
Thermocole Neopor Product
Neopor®, an expandable polystyrene (EPS), is BASF's forward-looking solution to improve insulation in newly built and renovated properties. Neopor® foams are silvery grey in colour because they contain graphite which considerably increases insulation performance. Neopor is a further developed foam material on basis of polystyrene and a registered trade mark of the BASF. In addition the raw granulates contains graphite, which is present later in the finished plate finely divided and lets these appear silver-grey. The advantage is in the fact that compared with polystyrene with less raw material a clearly better thermal insulation is obtained. Like that are necessary for the same damming achievement only half at raw materials and/or. contrary to polystyrene a plate can be thinner around a 1/5. The graphite particles strew the radiant heat better and reduce so the heat conductivity of the material.
Thermocole E - Por Product
E- POR an expandable polystyrene (EPS), is BASF's crack resistant tough elastic foam with smooth haptics and excellent solvent resistance which can be stored, processed and recycled just like the classic styropor.